Pac shot of a bike cleaning kit.

How to Keep Your Titanium Bike Clean: Essential Tips for Maintenance and Longevity

Titanium bikes are celebrated for their durability and high performance. However, to ensure that your titanium bike remains in peak condition, regular cleaning is crucial. Here’s a comprehensive guide to cleaning:

Gather Your Cleaning Supplies
Before you start cleaning, make sure you have the right tools and supplies.

We recommend Fenwicks cleaning products.

Fenwicks are a family run business, started in 1995 when material scientist Jonathon created a hardcore cleaning product safe to use on delicate surfaces. As he and his twin brother James are avid cyclists, it was not long before they produced a range of excellent cleaning products specifically engineered for cleaning bikes.

Fenwicks offer a comprehensive Bike Cleaning Kit  which contains:

All Conditions Chain Lube
Foaming Chain Cleaner
Chain Cleaning Sponge
Gear Cleaning Brush
Bike Cleaner in an handy trigger bottle 

Step By Step Guide to using Fenwicks Cleaning Products

Step 1:  Start with the chain and gears.
Step 2:  Shake the foaming chain cleaning can well before use.
Step 3:  Place the chain in middle gear for ease of use.
Step 4:  Whilst turning the crank spray Fenwicks Foaming Chain Cleaner directly on to chain.
Step 5:  Leave to soak for a couple of minutes – this can be done whilst you clean the rest of the bike with Fenwicks Bike Cleaner.
Step 6:  Spray all your bike with the Bike Cleaner - leave for 30 secs.
Step 7:  Use a sponge or cloth to agitate the dirt on your bike making sure you rub the whole bike down.
Step 8:  Go back to the chain, using the Chain Cleaning Sponge.  Insert chain into ‘V’ slot of sponge on the lower section of the chain.  Holding sponge firmly in position, run the chain backwards through the sponge for 30 seconds.
Step 9:  Rinse the chain thoroughly with clean water and the rest of the bike
Step 10 Use a microfiber cloth to dry the frame and components

Lubing

Step 1:  Now you have a clean chain - Twist top cap to regulate flow of the chain lube.
Step 2:  Apply a drop of lube to each roller.
Step 3:  Rotate chain for 20 seconds.
Step 4:  If required, wipe off excess with clean cloth.


While cleaning it is always a good idea to do basic maintenance checks:
Inspect Bolts and Screws: Ensure that all bolts and screws are tight and in good condition. Check the headset, bottom bracket, and other key components.
Brake and Gear Adjustments: Regularly check and adjust your brakes and gears to ensure they are functioning correctly.

A Fenwicks Cleaning Kit is included with every new Reilly bike shipped within the UK.  

Reilly Reflex getting te VIP treatment from James at Raiders Gravel 2024